Hello class, today
we will be installing front speakers in a 1992
Camry LE. The speakers today are the
Clarion SRS1624 components.
|
The main parts that
come in the box are the woofer, tweeter, the
tweeter housing, and adapter bracket.
|
We'll start with
the driver's side door.
|
The tweeter comes
with a few different parts... the housing that
it sits in, the attachment disc, metal clips,
and screws. Parts may differ depending
on what kind of speakers you have. |
Screw the metal
clips into the housing. These clips help
secure the housing into the door panel. |
Next, screw the
attachment disc into the housing. The
disc will hold the tweeter securely in the
housing. |
Feed the tweeter
wires thru the opening in the housing. |
You don't have
to, but as an extra measure I put double-sided
tape around the housing so that it holds
better in the door panel. |
Now for the
tricky part - the door handle bezel. Get
a flat head screwdriver and insert it by the
door lock as in the picture. Push down
on the screwdriver handle. This should
pop the top part out slightly. |
Do the same for
the bottom side. Insert the screwdriver
near the area indicated in the picture.
This time push up on the screwdriver
handle. The bottom part should pop out
slightly. |
Lastly, insert
the screwdriver as in the picture and push the
handle towards the end of the door (in this
case, push the handle left). the whole
bezel should pop out now. |
In this pic, you
can see the latch inside the door that the
bezel attaches to. |
And here you can
see the hook on the back of the bezel. |
It's a little
tricky and might require a couple tries but
it's pretty simple. Be gentle but firm
so as not to crack the bezel. |
Take a minute to
examine all the crud that's accumulated from
years gone by. |
|
|
Next
Page --> |
bravenet.com
